Self made MIP Panels masking LCD displays behind them. Flood lights by halogen lamps. Dummy footrests designed and manufactured by...

#simulation #flightsimulation #engineering #engineerslife #airbus #a320 #airbusa320 #design #construction #progress #turkey #turkish...

Here is a short video of the APU start procedure for the A320 (this one is from projectmagenta) I am trying jeehell lately. I will also...

The video below shows the procedure turn after the Middle Marker point with checkerboard visuals on the left cockpit window. #simulation...

Project Magenta version of changing managed speed in A320. #simulation #flightsimulation #engineering #engineerslife #airbus #a320...

#simulation #flightsimulation #engineering #engineerslife #airbus #a320 #airbusa320 #design #construction #progress #turkey #turkish...

This is a private Project, which started in 2003. It is a 1-1 size (without motion) Airbus A320 simulator based at home. It is full...

EWD and SD displays from Project Magenta. #simulation #flightsimulation #engineering #engineerslife #airbus #a320 #airbusa320 #design...

Finally I've solved the calibration issue with OC SIOC and the wet compass is working. This demonstration shows a heading change from 0...

Take off from Istanbul Ataturk airport (LTBA) 36L. Doing some tests with the FCU (autopilot) module, flying towards the Black See. Still...

Basis of design. This is where it all beings. I've first accomplished the 3D design of the complete cockpit prior to beginning with the...

Overhead circuit breakers are PU cast from an original Circuit Breaker. Backlighting is done via white led stripes. A really cool touch...

Here is a video showing some of the systems on my setup. This was a cool flight from LTBA (Istanbul Ataturk Airport) to LGAV (Eleftherios...

Batteries Off, APU Off, Ground Power not connected, this simulator is in a cold and dark state. #simulation #flightsimulation...

I have designed in 3D environment the Korry type buttons which are widely used in Airbus type cockpits. The file was then converted to...

I was lucky to be able to visit the Istanbul Airport (ICAO code is LTFM, IATA code is IST) prior to its official opening on 29.10.2018....

Finally getting there. The middle section of the overhead panel is progressing. Here are some update photos. The next panel I'll be...

With the 3D printed korry type buttons and the knobs, I am now finishing the overhead AIRCOND panel. The next panel will be the IRS and...